Injection engined motor has several advantages including economical with fuel that is environmentally friendly because, engine injection system used is a machine tersbut a way as to give the design some benefit for users.
To fix the injection machine is quite difficult because the machine injeksimenggunakan advanced technology so that ordinary mechanics can sometimes be difficult to solve problems on the machine. Injection engine problems had to be taken to the authorized repair shop, because the official workshop is an adequate tool in order to improve the system contained in the injection machine.
One of the problems that often arise damage to the motorcycle engine injection engine suddenly died and the condition of unstable gas when we use. This problem experienced by many users, especially motor injection for 125 cc motorcycles. This is presumably due to a blockage in the machine, especially on the injector filters, injectors and engine filter. Blockage caused by a buildup of dirt on the engine, causing the gas flow to the combustion chamber becomes smooth.
To fix the problem is to inspect the damage to the engine. Open the machine and check that section, if there is dirt on the right is the dirt that must be removed. Waste disposal must be done very carefully because the wrong actions will only damage the engine.
Clean the problems with using gasoline engine and injector cleaner by spraying or with a whisk-ngocok tersbut engine with a liquid dirt that interfere with the machine can be issued. If the shit out of the machine and the machine then replace the circuit injection engine problems have been resolved.
call and coment
To fix the injection machine is quite difficult because the machine injeksimenggunakan advanced technology so that ordinary mechanics can sometimes be difficult to solve problems on the machine. Injection engine problems had to be taken to the authorized repair shop, because the official workshop is an adequate tool in order to improve the system contained in the injection machine.
One of the problems that often arise damage to the motorcycle engine injection engine suddenly died and the condition of unstable gas when we use. This problem experienced by many users, especially motor injection for 125 cc motorcycles. This is presumably due to a blockage in the machine, especially on the injector filters, injectors and engine filter. Blockage caused by a buildup of dirt on the engine, causing the gas flow to the combustion chamber becomes smooth.
To fix the problem is to inspect the damage to the engine. Open the machine and check that section, if there is dirt on the right is the dirt that must be removed. Waste disposal must be done very carefully because the wrong actions will only damage the engine.
Clean the problems with using gasoline engine and injector cleaner by spraying or with a whisk-ngocok tersbut engine with a liquid dirt that interfere with the machine can be issued. If the shit out of the machine and the machine then replace the circuit injection engine problems have been resolved.
call and coment
No comments:
Post a Comment